Refer to the "Adjusting Microphone Level" topic in this guide for more details. If the audio is too quiet or causes distortion, adjust the gain manually. Use the MODE button to select the preset mode that fits your application and adjust the microphone gain to suit the application.The PH PWR LED on the rear panel illuminates when phantom power is activated.Ĭaution: Never activate phantom power if using a ribbon microphone, as this may cause damage to the microphone. To turn on phantom power, press and hold the mute button for 3 seconds. Note: Condenser microphones require phantom power to operate. The XLR/TRS combo input is compatible with microphones, guitars, instruments, and other line-level sources. Plug a microphone or instrument into the input on the rear panel.Open the Shure MVi driver from the sound control panel and raise the headphone volume from the playback or output tab. Adjust the headphone volume on the MVi device driver.If MVi is not the selected audio device, open the sound control panel and select the Shure MVi driver. The MVi is automatically assigned as the active audio device.The touch panel illuminates to indicate a successful connection. Use the appropriate cable (USB or Lightning).ĭrivers will be installed automatically.
0 Comments
Leave a Reply. |